With AutoLogg, your trips are automatically recorded. All you need to do is add details with a few clicks.
To start the automatic logbook recording, it is necessary to connect AutoLogg to your vehicle once. This can be done either with our AutoLogg hardware (which is plugged into the car in seconds and comes free of charge by mail) or with our Generation 2.0 - AutoLogg Connected - which allows a direct connection to the vehicle. You can find the current information for which models this is possible in our store: www.autologg.com.
For each logbook you need an active license. You dont have one yet? Just order it here: www.autologg.com
The AutoLogg hardware:
Your AutoLogg package comes with everything you need and can be put into operation immediately.
How it works:
1. Log in to AutoLogg and connect your vehicle.
2. Plug the device into the vehicle (OBD slot). The plugging in is limited to a few steps and done in seconds.
3. Edit and export your journeys in the AutoLogg app.
AutoLogg Connected:
Connect your vehicle directly during registration. This is done with a few clicks.
All journeys are automatically recorded and can be conveniently edited via smartphone, tablet or PC. A "swipe" is all it takes and trips are assigned - very simply. Even the route to work can still be added with a click. Additional details (such as drivers or detours) can be added under notes, which also appear in the export. If needed, all assigned trips can be viewed and printed in the web portal.
It is not necessary to carry the smartphone with you or to connect it separately, as the hardware or the vehicle (in the case of Connected) record the trips directly.